Applies to: Wet grinding module

Maintenance table

Once per week

Action Recommended interval / Terms Procedure / Tools

Measure pH value

Once per week

Filling up with cooling liquid

Check connections

  • Once per week

  • After moving the wet grinding module

Visual check

Once a month

Action Recommended interval / Terms Procedure / Tools

Cleaning the coarse filter

  • After 50 operating hours

  • Once a month

Cleaning the coarse filter

When necessary

Action Recommended interval Procedure / Tools

Filling up with cooling liquid

When display lights up yellow

Filling up with cooling liquid

Cleaning the flat pleated filter

If the negative pressure in the milling machine is too low

Cleaning the flat pleated filter

Changing the cooling liquid

  • For heavy contamination

  • At least every 6 months

Exchanging the cooling liquid and cleaning the cooling liquid tank

We recommend having a service technician carry out an inspection after 1,000 operating hours or every 2 years. Also have an inspection carried out with every repair.